• MHSv1 Nano Biscotte V4 Assembly

click on thumbnail to zoom
Item #: V1NBV4A
Our Price: $79.29
Setup For?  
Add Speaker?
Add Header/Wiring Harness?

Description  more details

MHSv1 Nano Biscotte Sound Module V4 Assembly

These now come in a Black/Gold colorway on the PCB (Shown in pictures)
These are designed to hold 1x 18650 battery such as the Trustfire 18650 2 Pack that we sell.

-- This version of the assembly is not compatible with a recharge port --  You can find the other version HERE

The sound module comes with an SD card preloaded with Lightmeat, Greymeat and Darkmeat sound fonts. You can add your own sound fonts to the SD cards as well.

The SD card will need to be configured for the individual components being used such as setting the volume to 3 for all Saber Essentials speakers.

This has the same features as a NBv4 except for the following changes.

1. This board has a 3rd channel power extender built in. Since this shares the same circuit as the NeoPixel data line there is jumper pads that switch between the two setups. It comes setup by default NOT for NeoPixel use. To enable it to be used for NeoPixel, the solder needs to be removed from the jumper pads which we can do for you if you select NeoPixel setup from the drop down selection above.

2. The pinout is different..

From top to bottom, board pinout
** Positive (+)
** Negative (-)
** Activator switch
** Channel 1 (-)
** Channel 2 (-)
** Channel 3 (-)
** NeoPixel Data

Do not solder to the module while the SD card is installed and do not remove or install the SD card while power is applied to the module.

  • Warranty is for 30 days from the date of purchase.
  • Warranty covers defects in workmanship and materials under normal use and service.
  • Damage due to improper soldering will void the warranty.
  • Warranty does not cover shipping charges to send it in for repair.

4" Long 
1.3" at the widest point (lip of the speaker mount)


Average Rating:
(based on 1 review)

Showing 1 Review:

by Chris
on 1/20/2019
from Dayton
I just finished an install with one of these, and it's great. All the features of the Nano V4, including color changing, without the need to wire an external power extender. I opted for the 3rd channel setup, with the wiring harness so that I'm not pulling on the end of the board solder joins when I pull the pack out of the saber. I did have to take off the battery holder to wire the speaker, but that's not a big deal. It's held on by a metric hex screw. I'm super pleased with this setup, it was simple to install and I love the sound and color changing.
Review and Rate this Item