• MHSv2 Nano Biscotte V4 Assembly

click on thumbnail to zoom
Item #: V2NBV4A
Our Price: $79.29
Setup For?  
Add Speaker?
Add Header/Wiring Harness?

Description  more details

MHSv2 Nano Biscotte Sound Module V4 Assembly

These now come in a Black/Gold colorway on the PCB (Shown in pictures)
These are designed to hold 1x 18650 battery such as the Trustfire 18650 2 Pack that we sell.

The sound module comes with an SD card preloaded with Lightmeat, Greymeat and Darkmeat sound fonts. You can add your own sound fonts to the SD cards as well.

The SD card will need to be configured for the individual components being used such as setting the volume to 3 for all Saber Essentials speakers.

This has the same features as a NBv4 except for the following changes.

1. This board has a 3rd channel power extender built in. Since this shares the same circuit as the NeoPixel data line there is jumper pads that switch between the two setups. It comes setup by default NOT for NeoPixel use. To enable it to be used for NeoPixel, the solder needs to be removed from the jumper pads which we can do for you if you select NeoPixel setup from the drop down selection above.

2. The pinout is different..

From top to bottom, board pinout
** Positive (+)
** Negative (-)
** Activator switch
** Channel 1 (-)
** Channel 2 (-)
** Channel 3 (-)
** NeoPixel Data

Do not solder to the module while the SD card is installed and do not remove or install the SD card while power is applied to the module.

  • Warranty is for 30 days from the date of purchase.
  • Warranty covers defects in workmanship and materials under normal use and service.
  • Damage due to improper soldering will void the warranty.
  • Warranty does not cover shipping charges to send it in for repair.
4" Long 
1.16" at the widest point (lip of the speaker mount)


Average Rating:
(based on 2 reviews)

Showing 2 Reviews:

by Andrew
on 1/29/2020
from Washington
All too easy
I found this to be a super easy way to start building a saber. This, along with a MWS switch and a MWS LED module, enabled me to build a working saber in about 20 minutes, with zero prior electronics experience.
by Geoffrey
on 12/22/2018
from Eastvale
PlectorPixel in less than 45 minutes for less than $200!
The NEW Nano Biscotte v4 Pre-Assembled kit is now available. I received mine today and wanted to do a review. The Custom Saber Shop no offers a V1 or V2 NB4 setup that has a larger PCB attached to a removable battery sled and speaker holder. You can buy it with or without the speaker, wiring harness, and setup for NeoPixel. Bought with a full MHSV2 Saber for less than $200 for everything without the blade. Only work I needed to do was - Drill and tap a blade retension. - Wire LED / NeoPixel Module. - Drill Switch hole and wire. - Solder to Wiring Harness. Such a great quick and easy option!
Review and Rate this Item