KR Pixel Sticks alleviate the need for peeling and sticking strips together. These strips are a 34.75" long rigid PCB with 132 carefully sourced LED's on both sides (264 total) that are staggered. This provides Maximum LED Coverage and is better than the typical 144 LEDs per meter.
The stick is designed with bigger solder pads for improved efficiency, rounded ends for easier foam installs, and pre-installed Data line resistors.
Please be aware
1. These are not meant for dueling
2. We do not recommend these to be trimmed and if you are looking for custom lengths, please use the flexible strips.
3. You will want to set your strip configuration to 132 LED's.
4. For 1" thin walled tubes order the stick specific foam.
We have found in our testing that 34.5" long tubes combined with a Parabolic Pixel tip worked the best with these strips. This is not a guarantee due various variables such as wire length etc. Your mileage may vary.
1" Thin, 1" Thick, and 7/8" Thin walled Transluscent White and Photon tubes can now be purchased at 34.5" .
The brightest on the scene!
I cant get enough of the pixel sticks! They are really bright and oh so easy to make and TCSS has everything to make it happen.