SPST Momentary blue ring Illuminated switch
Will work with any box designed to hold 16mm switches and the recessed AV switch hole service. These will NOT work with the AVbezel as the shaft is not long enough to fit the nut on.
There is no internal resistor on these so you need to use the correct resistor in order to not fry the LED. The LED has a forward voltage of 3.3V and runs at 20mA..
Will work with any box designed to hold 16mm switches and the recessed AV switch hole service. These will NOT work with the AVbezel as the shaft is not long enough to fit the nut on.
There is no internal resistor on these so you need to use the correct resistor in order to not fry the LED. The LED has a forward voltage of 3.3V and runs at 20mA..
If you don't use these consider making a ....switch!
These look so sweet! Shiny chrome and LED what else can you ask for! For the install I used a washer under the nut to help tighten it. Pretty ring.....my preciousssss!!!! Don't forget to use a resistor for the LED!