7 channel 22 Pin Chassis Connector

Be careful with your build, but this is extremely useful

If you are using this, you can keep certain parts in place that may not work well with a fully removeable chassis install such as switches or pixel connector wiring. You need to plan for the very sensitive nature of this connector. If you need to run a power wire for your pixel connector then you want to ensure that your chassis is completely flush with the inside of your hilt; or you will want some sort of way to ensure the connection is made dead-center. In my build, I 3d-designed a chassis with a sleeve so that the lower half fit perfectly into the upper half, this way there was no chance of a short, (or worse). This part allowed me to have a removable chassis in a situation where I needed the pixel connector and the wiring from the control box to be static and there was no way to incorporate that into the entire chassis. I used this in a 2003 Master Replicas Darth Vader conversion. I also used the conversion part sold in this store.