1000mA BuckPuck LED driver.
These do not have the CTL and REF wires anymore (I will update pic)
These are used in place of a resistor and are much more efficient.
Min input voltage is 5v.
Max input voltage is 32v.
This 1000mA version will provide the correct mA for most Luxeon III LED's or any LED requiring 1000mA.
The driver can easily power multiple LED's as long as you provide enough voltage.
IE.. you need around 5v for one white Lux III, 8V for two white Lux III, 12v for three etc..
|
|