LED driver with 6 constant current settings.
Turns on and off by switched input voltage.
Minimum input voltage = 6v or LED voltage +1v whichever is higher
Maximum input voltage = 20v
Heatsink should not be required unless you are running >10V of LEDs at 1.5A
Reverse polarity protected.
The driver size is 1.2" OD
The DIP switch settings are as follows:
| SW1 | SW2 | SW3 | SW4 | SW5 | SW6 |
| ON | OFF | OFF | OFF | OFF | ON | 700mA |
| OFF | ON | OFF | OFF | OFF | ON | 800mA |
| OFF | OFF | ON | OFF | OFF | ON | 1000mA |
| OFF | OFF | OFF | ON | OFF | ON | 1200mA |
| OFF | OFF | OFF | OFF | ON | ON | 1400mA |
| OFF | OFF | OFF | OFF | OFF | OFF | 1500mA |
|
|