Add-on board for the Adjustable LED driver.
This board will add the same functions as the old 3w driver to the new adjustable LED driver.
Wiring schematic can be seen HERE
Works by electrically opening/closing the IN- to LED- connection path, that is how it switches power on/off to the adjustable driver.
With the combo turned off via the momentary (for the momentary firmware) or the latching (for the latching firmware) switch, the combo will draw less than 50microamps, so no fear of draining the battery over a few months.
The DIP switch setting will still work to set the required output current. The DIP switch will set the maximum regulated current and the add-on board will then do the dimming/clash etc from 0mA up to the DIP switch selected maximum.
|
|